Binks EMG Serie Manual De Mantenimiento página 14

EN
Fluid leaking from
packing nut
Fluid leaking or dripping
from front of gun
Fluid dripping or leaking
from bottom of cup
Runs and sags
All manuals and user guides at all-guides.com
Packing worn.
Fluid tip or fluid
needle worn or
damaged.
Foreign matter in
fluid tip.
Fluid needle dirty or
stuck in needle
packing.
Wrong size fluid
needle or fluid tip.
Cup loose on gun.
Cup fluid inlet seat
dirty.
Too much material
flow.
Material too thin.
Gun tilted on an
angle, or gun motion
too slow.
Page 14 of 16
Replace.
Replace fluid tip and fluid needle.
Clean.
Clean.
Replace fluid tip and fluid needle.
Tighten.
Clean.
Turn fluid adjusting knob clockwise
or switch to smaller fluid tip and
fluid needle size.
Mix correctly or apply light coats.
Hold gun at right angle to work and
adapt to correct gun technique.
SB-E-2-852-R1.0