Intel X25-M Instrucciones De Instalación página 5

2. Attach one end of the SATA interface cable to the SATA interface
connector on your computer's motherboard or SATA host adapter.
Note: SATA connectors are keyed to ensure correct orientation.
3. Attach the other end of the SATA interface cable to the SSD.
See Figure 2, Item 1.
4. Attach the power cable or adapter to the SSD. See
5. Secure the drive by either inserting one of the M3-0.5x5mm or
M3-0.5x6mm screws in each of the side-mounting or bottom-mounting
holes; or by sliding the SSD with adapter bracket into the desktop's 3.5 inch
drive bay.
Note: Do not over tighten the screws, as this may damage the SSD.
Figure 2. Attaching SATA interface cable and power supply cable for use in a
desktop PC
http://www.intel.com/go/ssd
Figure 2, Item 2.
1. SATA interface cable
2. Power supply cable