Package Contents (Lists) - Husky MP180 Guía De Uso Y Cuidado

Pre-operation (continued)

PACKAGE CONTENTS (LISTS)

Part Description
A Output amperage indicator
B Tripped protection/alert indicator
C Input voltage indicator
D Middle knob
□
MIG mode: voltage adjustment knob
□
STICK mode: hot start amperage adjustment knob
□
TIG mode: N/A
NOTE: the numbers "1-10" around the knob indicate a
scale instead of actual values.
E Left Knob
□
MIG mode: wire feed speed adjustment knob
□
STICK/TIG mode: amperage adjustment knob
NOTE: the numbers "1-10" around the knob indicate a
scale instead of actual values.
F Hole for gas hose (spool gun)
G MIG gun/spool gun cable socket
H MIG gun electrode polarity jumper
I Control socket (for MIG gun/spool gun/foot pedal)
J 2T/4T switch button
K Welding mode switch button
Part Description
L Right knob
□
MIG mode: inductance adjustment knob
□
STICK/TIG mode: N/A
NOTE: the numbers "1-10" around the knob indicate a
scale instead of actual values.
M Negative (-) DINSE socket
N Positive (+) DINSE socket
O ON/OFF power switch
P Input power cord
Q 120V/240V voltage switch
R Gas input
S Wire spool spindle
T Shielding gas connector
U MIG gun/spool gun switch
V Wire feeder
9
Please contact 1-888-43-HUSKY for further assistance.
HUSKYTOOLS.COM