Brewing - Arzum OKKA RICH SPIN M Manual De Uso

EN
• Remove the coffee pot from its slot.
• Press the Strong and Milk buttons simultaneously for 3 seconds.
After the beep sound, the leds of the Strong and Milk modes will start
to flash and then the manual brewing temperature setting mode will be
activated.
You can increase the temperature by pressing the milk mode button.
The temperature is increased by 1 C° in every press of the button.
The allowable temperature rise is max. 1°C.
Decreasing the temperature:
• Plug in your appliance.
• Press ON/OFF button.
• All leds on the control panel will flash once.
• Remove the coffee pot from its slot.
• Press the Strong and Milk buttons simultaneously for 3 seconds.
After the beep sound, the leds of the Strong and Milk modes will start
to flash and then the manual brewing temperature setting mode will be
activated.
You can decrease the temperature by pressing the Strong Mode button.
The temperature is decreased by 1°C in every press of this button.
The allowable temperature decrease is max. 3°C.
4.BREWING (For Classic, Strong and Slow Brew
Modes)
1. Plug in your appliance
2. Press the On/Off button on the panel.
Note: For delicious coffee, make sure that
inside of the coffee pot is clean.
3. Your appliance can make coffee up to
5 people at a time in Classic, Strong and
Slow Modes.
Pay attention not to exceed water-coffee-
sugar mixture or milk mixture beyond the MAX COFFEE level line in the
coffee pot as the size of cups you are using
ARZUM OKKA RICH SPIN M 29