Before Using The Dishwasher - cecotec BOLERO AGUAZERO 1006 COMPACT Manual De Instrucciones

ENGLISH
Note
Depending on where the power supply is, you may need to drill a hole on the opposite side of
the cabinet.

4. BEFORE USING THE DISHWASHER

Fig. 7
- For a correct washing, the dishwasher needs soft water. Otherwise, water will leave
scale remains in the tableware and in the interior of the machine which may block the
dishwasher.
- To do this, water goes through a system that removes the ions that form the hardness of
the water, either special dishwasher salt or a water softener.
- Before the first use, follow these steps:
1. Set the water softener.
2. Add salt to the water softener.
3. Load the basket.
4. Fill the detergent compartment.
4.1. Dishwasher salt
- Use only salt special for dishwashers.
- The salt compartment is located under the basket.
Filling the compartment with dishwasher salt
Fig. 8
1. Remove the basket and loosen the compartment cap.
2. Open the salt compartment cap by turning it counterclockwise.
3. Fill the compartment with the dishwasher salt. The use of a funnel will make the process
easier. (Fig. 8)
4. Add water to the salt compartment until the limit (only in the first use). It is normal for a
small amount of water to come out of the salt compartment.
5. Place the cap back and tighten it.
6. The salt indicator light will turn off after the salt compartment is filled with salt.
- When running the dishwasher, the salt compartment will fill with water, so you must fill
the compartment before running the dishwasher.
- Fill the salt compartment immediately before running the dishwasher as, otherwise, the
filtering system, pump and other important parts of the machine may get damaged. The
guarantee shall not cover this eventuality.
Warnings
- Use exclusively salt for dishwashers.
66