Before First Use; How To Use - Duronic BL510 Manual De Instrucciones

This manual is for two different products, the BL510 and BL520. Both are
compact personal blenders ideal for making daily smoothies or cold drinks.
The BL510 is our standard model that comes with one bottle (570ml) and has a
black exterior body.
The BL520 is our premium model that comes with two bottles (570ml and 400ml)
and has a stainless-steel exterior body.
1. Before first use, remove all packaging and set aside.
2. Clean the bottle(s) and blade for the first time as per the instructions in
'Cleaning and Maintenance'.
3. Wipe clean the motor unit and dry.
4. Place the blender motor unit on a flat, dry surface and located close to an
electrical mains socket.
1. Add the ingredients to the bottle. Don't fill the bottle above the MAX 570ml
mark (or MAX 400ml mark if you are using a 400ml bottle).
2. Fit the blade assembly onto the bottle. Tighten the blade assembly firmly in
place.
3. Turn the bottle upside down so that the blade assembly is at the bottom, then
line up the tabs on the bottle with the openings on the rim of the motor unit.
Insert the bottle into the motor unit.
4. The blender has a twist-to-start activation. To start blending simply turn the
bottle clockwise to lock it in place and start the blending. Your blender will not
work unless the bottle is correctly locked into position.
Introduction

Before First Use

How to Use

9