Recalling Previously Recorded Readings (Recall) - Keysight Technologies U1231A Guia Del Usuario

3 Multimeter Features

Recalling Previously Recorded Readings (Recall)

Trig Hold-Log and Auto Hold-Log readings are recorded automatically for future
review or analysis by default.
– Up to a maximum of 10 records can be stored at a time. The Trig Hold-Log
NOTE
– By default, each Trig Hold-Log and Auto Hold-Log reading is stored
– You can choose to save the temporary records in the multimeter's nonvolatile
Recalling readings stored in the multimeter's memory is performed through the
1 Press
Figure 3-7
94
and Auto Hold-Log records share the same memory space. When the
memory's index is full, the next reading to be recorded will overwrite the last
reading recorded (the 10
temporarily in the multimeter's volatile memory. All temporary records will
be erased when the multimeter is turned OFF.
memory by pressing and holding
through this method remains saved even when the multimeter is turned OFF
or if the battery is replaced.
key.
for more than 1 second to enter the Recall menu. The last recorded
reading is shown on the display. The analog bar graph is used to indicate the
record index.
View display
If nothing has been recorded,
th
index).
for more than 1 second. Records stored
is displayed instead.
Keysight U1231A, U1232A, and U1233A User's Guide