sunjoe SPX160E-MAX Manual Del Operador página 8

Fig. 4
5. Align lugs with slots then insert the middle extension lance
to the trigger gun. Rotate until it locks (Fig. 5).
Fig. 5
6. Repeat above steps for the connection between the front
extension lance and the middle extension lance (Fig. 6).
Fig. 6
7. Connect the one end of the garden hose to the washer
water inlet and attach the other end to the water supply
(Fig. 7-8).
m
WARNING!
The machine is not suitable for connection
to the potable water main.
m
WARNING!
Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
Fig. 7
Fig. 8
8. Make sure the switch is in OFF position before plugging
into the power outlet (Fig. 9).
Fig. 9
9. Connect the pressure washer to the electrical supply
matching "SPECIFICATION" in this manual. Press the
reset button on the GFCI plug until the indicator
illuminates to make sure the washer is ready for operation
(Fig. 10).
NOTE: The GFCI may need to be reset when first plugged into
the electric outlet. Press the "Reset" button until the power
right indicator on the GFCI illuminates.
8