Intended Use; Technical Specification - Assa Abloy SW100 Manual Del Usuario

Intended use

The ASSA ABLOY SW100 is an automatic swing door operator developed to make life easier for
everyone who can benefit from automatic doors. The ASSA ABLOY SW100 is a low-energy operator
using a DC motor and a gear-reduction system to drive an arm system, which opens the door. It is
to be installed indoors where it is suitable for almost all types of external and internal swing doors.
This widely-used operator can be found in applications in health care, residential, office and public
buildings.
The door is designed to offer continuous use, a high degree of safety and maximum lifetime. The
system is self-adjusting to the effects caused by normal variations in the weather conditions and to
minor friction changes caused by e.g. dust and dirt.
For escape in emergency situations the doorset is opened manually.
For installation and maintenance see Installation and Service manual 1005088.
Save these instructions for future reference.

Technical specification

Manufacturer:
Address:
Type:
Mains power supply:
Power consumption:
Class of protection:
Sound pressure:
Approvals:
8
ASSA ABLOY Entrance Systems AB
Lodjursgatan 10, SE-261 44 Landskrona, Sweden
ASSA ABLOY SW100
100-240 V AC +10/-15%, 50/60 Hz
Max. 75 W
IP20
Third party approvals from established certification organizations valid
for safety in use, see Declaration of Conformity.
Issue 2021-05-25 1005607-multi-16.0