Intended Use; Technical Specification - Assa Abloy SW300 Manual De Instrucciones

As your entrances are part of your business flow, there's every reason to keep
them working well. ASSA ABLOY Entrance Systems offers you a maintenance and
modernization expertise to rely on. Our Maintenance Programs and Modernization
Services for entrance automation is backed by a extensive expertise for all types
of pedestrian- and industrial door and docking systems, independent of brand.
At your disposal is a team of dedicated expert technicians, proven through decades
of maintenance, service and satisfied customers.

Intended use

The ASSA ABLOY SW300 and ASSA ABLOY SW150 are automatic swing door operators developed
to make life easier for everyone who can benefit from automatic doors. The ASSA ABLOY SW300
and ASSA ABLOY SW150 are low-energy as well as a full power operators using a DC motor and a
gear-reduction system to drive an arm system, which opens the door. It is to be installed indoors
where it is suitable for almost all types of external and internal swing doors. This widely-used oper-
ator can be found on applications ranging from handicapped-access in private homes to high-traffic
retail operations.
The door is designed to offer continuous use, a high degree of safety and maximum lifetime. The
system is self-adjusting to the effects caused by normal variations in the weather conditions and to
minor friction changes caused by e.g. dust and dirt.
For escape in emergency situations the doorset is opened manually.
For installation and maintenance see Installation and Service manual 1007913.
Save these instructions for future reference.

Technical specification

Manufacturer:
Address:
Type:
Mains power supply:
Power consumption:
Class of protection:
Sound pressure:
Approvals:
8
ASSA ABLOY Entrance Systems AB
Lodjursgatan 10, SE-261 44 Landskrona, Sweden
ASSA ABLOY SW300 and ASSA ABLOY SW150
100-240 V AC +10/-15%, 50/60 Hz
Max. 300 W
IP20
Third party approvals from established certification organizations valid
for safety in use, see Declaration of Conformity.
Issue 2019-06-28 1009214-multi-8.0