Lenco EPB-430 Manual De Usuario página 7

Long pressing the touch area of ear buds for 3 seconds. You will hear prompt tone, Blue and
red light will flash alternately to indicate it is powered on.
2. Power off
1) Power off automatically
When the earbuds are put back in the charging case, they will power off. The red indicator
will lit, to indicate charging is resumed.
2) Power off manually
Press the touch area of the ear buds for 6 seconds. You will hear a prompt tone. The red
light flashes 3 times. Then power off is successfully.
3. Pairing for both ear buds:
Auto Pairing:
Take the earphones from the charging case, both earphones will power on automatically.
The red and blue indicators will flash alternately and pair each other automatically. The red
and blue indicators of one earbud flashes quick and alternately, while the blue LED indicator
of the other earbud flashes slowly. This indicates, they are ready to connect with Bluetooth
devices.
Turn on your Bluetooth source and find "Lenco EPB-430" in the Bluetooth devices list. Select
it and you will hear prompt tone. Now the earbuds are connected with the Bluetooth device
properly. If there is no pairing within 3 minutes, the earbuds will power off automatically.
4. Calling
A ringtone indicates when there is the coming call.
To answer a call / End a call: Touch L or R button quickly.
Reject a call: touch 2 seconds.
Redial the last number: touch 3 times quickly.
5. Play/ pause music
When the earbuds is playing with music, you can touch the touch area of Left or Right
earbud once to pause. Touch once again to play.
6. Next song
When the earbuds is playing with music, double touch the earbud (R) to the next song.
5