Makita XCU11 Manual De Instrucciones página 11

9. Place the sprocket cover on the chain saw so that
guide bar.
3
Fig.12
1. Sprocket cover 2. Guide bar 3. Hole
10. Turn the lever clockwise fully and turn back the
tension.
11.
12. Turn the lever clockwise until the sprocket cover is
secured then return it to the original position.
Fig.13
1. Lever 2. Sprocket cover
Removing the saw chain
To remove the saw chain, perform the following steps:
1.
guard.
1
2.
the saw chain tension.
2
Fig.14
1.
3.
1
Fig.15
2
1. Lever
4.
Fig.16
1. Lever 2. Sprocket cover
5.
chain and guide bar from the chain saw body.
11 ENGLISH
Release the chain brake by pulling the front hand
1
Pull the lever up while pressing its edge.
Turn the lever counterclockwise until the sprocket
Remove the sprocket cover then remove the saw
1
1
2