Before Starting The Equipment - VITO PRO-POWER VIMLSF12 Manual De Instrucciones

EN
Do not let children play with plastic
bags, foils or small parts! There is a
danger of swallowing or suffocating!
ORIGINAL OPERATING
INSTRUCTIONS
Safety information.
Cordless multifunction tool.
Triangular sanding/grinding plate.
Scraper.
Allen key.
3 grinding/sanding papers.
HSS saw blade.
Battery.
Battery charger.
INTENDED USE
The multifunction tool is suitable
for sanding/grinding small areas. A
sanding/grinding tool with a vacuum
extractor must be used for sanding/
grinding large areas.
The equipment is designed for the
sanding/grinding of wood, iron,
plastic and similar materials using
the appropriate sanding/grinding
paper. Furthermore, the equipment
is intended for sawing wood, plastic
and similar materials, as well as
scraping off glued carpets, filling
compound residues, old paint and
similar applications.
The equipment may only be used for
the tasks it is designed to handle.
Any other use is deemed to be a
case of misuse. The user/operator
and not the manufacturer will be
liable for any damage or injuries of
any kind caused as a result of this.
Please note that our equipment
has not been designed for use in
commercial, trade or industrial
applications. Our warranty will be
voided if the equipment is used
in commercial, trade or industrial
businesses or for equivalent
purposes.
14
SOUND AND VIBRATION
Sound and vibration values were
measured in accordance with EN
60745.
WEAR EAR-MUFFS
The impact of noise can cause
damage to hearing.
Total vibration values (vector sum
of three directions) determined in
accordance with EN 60745.
ADDITIONAL INFORMATION
FOR ELECTRIC POWER
TOOLS
WARNING!
The specified vibration value was
established in accordance with a
standardized testing method. It may
change according to how the electric
equipment is used and may exceed
the specified value in exceptional
circumstances.
The specified vibration value can be
used to compare the equipment with
another electric power tools.
The specified vibration value can
be used for initial assessment of a
harmful effect.
Reduce noise generation and
vibration to a minimum!
Use only equipment that is in perfect
condition.
Maintain and clean the equipment
regularly.
Adopt your way of working to the
equipment.
Do not overload the equipment.
Have the equipment checked if
necessary.
Switch off the equipment when not
in use.
Wear gloves.
RESIDUAL RISKS
Even if you use this electric power tool
in accordance to instructions, certain
residual risks cannot be eliminated.
The following hazards may arise
in connection with the equipment's
construction and layout:
1. Lung damage if no suitable
protective dust mask is applied.
2. Damage to hearing if no suitable
ear protection is applied.
3. Health damage caused by hand-
arm vibrations if the equipment is
used over a longer period or is not
properly guided and maintained.
BEFORE STARTING THE
EQUIPMENT
Before you connect the equipment to
the power supply make sure that the
data on the rating plate are identical
to the supply voltage.
FITTING THE PLUG-IN
TOOLS (FIGURES 1/2/3)
To fit the plug-in tools safely you
should hold the multifunction tool so
that the ON/OFF switch (1) points
down and the tool mounting (2)
faces up.