Eiko VERT Instrucciones De Instalación página 2

OPTIONAL BRACKETS INSTALLATION:
ALWAYS TURN OFF THE POWER SUPPLY FROM MAIN CIRCUIT BREAKER FIRST!
• THERE ARE 4 OPTIONAL BRACKETS FOR THIS FIXTURE. SEE DIAGRAM BELOW.
SLIP FITTER MOUNTING:
ALWAYS TURN OFF THE POWER SUPPLY FROM MAIN CIRCUIT BREAKER FIRST!
1. REMOVE THE BRACKET MOUNTING SCREWS ON THE FIXTURE AND RUN THE WIRES THROUGH THE
BRACKET. (FIGURE 1)
2. INSTALL THE BRACKET ON THE FIXTURE. (FIGURE 2)
1
EiKO Global | 18000 W 105th, Olathe, KS 66061 | (P) 1-800-852-2217
EiKO Canada | 81 King St, Barrie, Ontario L4N 6B5 | (P) 1-705-721-5189
SLIP FITTER
DIRECT
MOUNTING
SQUARE
AND ROUND
POLES
YOKE
MOUNTING
2
eiko.com