Eiko VERT Instrucciones De Instalación página 5

YOKE MOUNTING WIRING:
ALWAYS TURN OFF THE POWER SUPPLY FROM MAIN CIRCUIT BREAKER FIRST!
1. DRILL HOLES ON THE WALL AS SHOWN. (FIGURE 12)
2. KNOCK THE EXPANSION BOLTS INTO THE WALL. (FIGURE 13)
3. CONNECT THE FIXTURE TO THE BRACKET AND TIGHTEN THE SCREWS; CONNECT THE WIRES
PROPERLY AND PUT THEM INTO JUNCTION BOX. (FIGURE 14)
• NOTICE: ADJUSTABLE ANGLE IS 0-90° (FIGURE 14)
12
EiKO Global | 18000 W 105th, Olathe, KS 66061 | (P) 1-800-852-2217
EiKO Canada | 81 King St, Barrie, Ontario L4N 6B5 | (P) 1-705-721-5189
13
EXPANSION BOLT
14
FIXTURE
YM BRACKET
eiko.com