Rointe ELBA SWT TELON40B077 Manual De Instalacion Y Uso página 14

4. Insert the plugs into the holes made.
5. Screw the plastic anchoring piece to the wall with the screw Ø 6.5 x 50 mm.
6. Screw the two towel rail fastening pieces and the plastic fastening piece to the horizontal
tube of the towel rail as shown in the figure below with the screw Ø 8 x 26 mm.
7. Insert the assembly from point 6 into the plastic anchoring piece and fasten with the Ø
5 x 12 mm grub screw.
8. Fit the trim on the cable clamp.
Nº.
1 Rawl Plug Ø10 x 45 mm
2 Fixed plastic bracket
3 Screw Ø 6.5 x 50 mm
4 Plastic bracket with nut M6
5 Plastic head support
6 Screw Ø 8 x 26 mm
7 Plastic cover support
8 Locking screw Ø 5 x 12 mm
9 Product
14
ITEM