Optika Italy OPTIKAM HDMI PRO Manual De Instrucciones página 13

1 Scale bar
2 Coordinate
3 Line
4 Freehand line
5 Rectangle
6 Circle
7 Polygon
8 Perpendicular
9 Concentric circles
10 Bicircle
11 Angle
12 Setting
13 Save results
14 Set scale
15 Exit
Note:
All the measurements on the live image will be removed when exiting from there.
The measurement result can be saved on the captured images provided these are saved.
On/off the scale bar on the picture.
To get the coordinates of the selected points.
Arbitrary direction, horizontal and vertical line measurement.
To get a freehand line length.
Rectangular measure of perimeter and area.
Selectable to achieve the data of perimeter or area.
Center Point: It uses both center point and point on the circle to
draw a circle.
Two Point: To draw a circle according to the diameter.
Three Point: To use 3 points on the circle to draw a circle.
Selectable to obtain data on radius, perimeter or area.
For a pre-set setting, diameter, perimeter and area are selected.
To measure a polygon perimeter and area.
Selectable to obtain data of perimeter or area.
It measures the perpendicular length.
It gets the diameters of two concentric circles.
It gets the distance between the central points of two circles.
To measure the angle.
1) To set the measurement line width & colour and the font
colour.
2) Magnifier On/off: To switch the magnifier on/off.
When the magnifier is on, the area in which the cursor is located
will be zoomed and placed in the corner to help an accurate
location of the measurement point.
Export the measurement results to an Excel or Text file.
The exported results will be saved in the
/ MEASURE folder on the SD card.
It allows to create 10 groups of calibration files, among which the
user can chose the required measurements.
It allows the exit from the measurement.
Page 13