Function Control; General; Definition Skilled Worker / Specialist; Authorized Use - probst STS Serie Instrucciones De Uso

Models

2.4

Function Control

2.4.1

General

•
Before every usage of the device check the functions and the working condition.
•
Maintenance and lubrication are only permitted when device is shut down!
•
Do not use the device, until all faults which can cause safety hazards are removed.
•
If there are any cracks, splits or damaged parts on any parts of the device, immediately stop using it.
•
The operating instructions must be available at the workplace every time.
•
Do not remove the type plate of the machine.
•
Unrecognisable information signs (such as regulatory or prohibition signs) must be replaced.
2.5

Definition skilled worker / specialist

Only skilled workers or specialists are allowed to carry out the installation-, maintenance-, and repair work on this device!
Skilled workers or specialists must have for the following points (if it applies for
this device), the necessary professional knowledge.
2.6

Authorized use

The unit is only suitable for cutting concrete paving stones, concrete slabs and other suitable concrete
parts.
Unauthorized modifications to the device or the use of any additional devices you may have built yourself
endanger life and limb and are therefore strictly forbidden!
●
The device is only designed for the use specified in this documentation.
•
Every other use is not authorized and is forbidden!
•
All relevant safety regulations, corresponding legal regulations, and additional local health and safety
regulations have to be observed.
Prior to every operation the user must ensure that:
•
the equipment is suited to the intended operation, the functioning and the working condition of the
equipment is examined, and the load is suitable to be handled.
Any doubts about instructions should be raised with the manufacturer prior to use.
3 Models
51200075 - 51200080
5 / 10
•
•
•
•
STS-33
V1
for mechanic
for hydraulics
for pneumatics
for electrics
GB