Maintenance and care
5
Maintenance and care
5.1
Maintenance
To ensure the correct function, safety and service life of the device the following points must be executed in
the maintenance interval.
Used only original spare parts, otherwise the warranty expires.
All operations may only be made in closed state of the device!
For all operations you have to make sure, that the device will not close unintended. Danger of injury!
MAINTENANCE DEADLINE
Daily
Monthly
Monthly
5.2
Repairs
Only persons with the appropriate knowledge and ability are allowed to repair the device.
Before the device is used again, it has to be checked by an expert.
5.3
Hints to the type plate
Type, serial-number and production year are very important for the identification of your device. If you need
information to spare-parts, warranty or other specific details please refer to this information´s.
The maximum carrying capacity/working load limit (WLL) is the maximum load which can be handled with
the device. Do not exceed this carrying capacity/working load limit (WLL).
If you use the device in combination with other lifting equipment (Crane, chain hoist, forklift truck,
excavator) consider the deadweight of the device.
Example:
5.4
Hints to the renting/leasing of PROBST devices
With every renting/leasing of PROBST devices the original operating instructions must be included
unconditionally (in deviation of the user´s country's language, the respective translations of the original
operating instructions must be delivered additionally)!
51200075 - 51200080
Auszuführende Arbeiten
•
Clean the unit from stone dust.
•
Turn or replace the knives if necessary. One knife has three cutting edges and can
therefore be used three times. See also exploded view in the appendix
•
Activities:
▪
Loosen fastening screws
▪
Turn knife 120° or replace it
▪
Tighten the fastening screws
•
Check the unit for wear and damage
Probst GmbH Gottlieb-Daimler-Straße 6 71729 Erdmannhausen, Germany
info@probst-handling.de www.probst-handling.de
10 / 10
V1
GB