Speed Setting; Selecting The Operation Mode; Maintenance And Cleaning Instructions; Cleaning And Storage - VITO PRO-POWER VIBCBBSFL20 Manual De Instrucciones

Speed setting

The rotation speed increases as you press the "ON/OFF"
button.
Do not operate the combi drill at low speed for a long
period of time.

Selecting the operation mode

The drill can operate in three different modes, drilling,
impact drilling and screwdriving.
▪ The drilling mode ( ) is suitable for drilling work on
metal and wood, plastic, PVC and other materials;
▪ The impact drill mode (
drilling in concrete, stone and masonry;
▪ The screwdriving mode (
tighten/loosen screws;
1. To select the desired mode, turn the operation mode
selector (3) according to the type of work to be
performed.

MAINTENANCE AND CLEANING INSTRUCTIONS

Before performing any checking, maintenance or
cleaning task, remove the battery from the combi drill.
The combi drill does not require any additional
lubrication or servicing. For a continuous and trouble-
free operation, you must perform regular cleaning and
proper maintenance tasks.

Cleaning and storage

Cleaning
After each use, clean all the components of the combi
drill. Clean the combi drill with a clean, damp cloth blow
it out with compressed air at low pressure.
Careful handling protects the power tool and extends its
service life.
The power tool and its ventilation slots must be kept
clean. Clean the ventilation slots regularly or whenever
they become blocked.
28
) should be used when
) allows you to
Storage
When not in use, store the combi drill in a dry, clean
place, free of corrosive smoke and out of children's
reach.

ENVIRONMENTAL POLICY

The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your
household waste!
According to the European Directive 2012/19 /EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
intended for this purpose.
You can get information regarding the disposal of the
power tool through the person in charge for recycling in
your city.

CUSTOMER SERVICE

Tel.: +351 256 248 826
E-mail: international@centrallobao.pt
Website: www.centrallobao.pt