Hudora 76095 Instrucciones Montaje Y De Uso página 4

INSTrUcTIONS ON ASSeMBLY AND USe
EN
cONGrATULATIONS ON PUrchASING ThIS
PrODUcT!
Please read these instructions carefully. The instructions are an integral
component of the product. Therefore, please store them and the pa-
ckaging carefully in case questions arise in the future. Please always
include these instructions when handing on the product to a third par-
ty. This product must be assembled by an adult. This product is not
designed for industrial use. Use the product for its intended purpose only.
TechNIcAL SPecIFIcATIONS
Item:
Item number:
Item weight:
Dimensions when assembled:
If you have assembly problems or would like further information on
the product, we have all you need and more at http://www.hudora.de/
artnr/76095/.
cONTeNTS
20 x Goal tubes
1 x Goal net
8 x Screws
11 x Pegs
1 x Usage instructions
Other items included are meant to facilitate safe transportation and are
not required for the installation and use of the product.
SAFeTY INSTrUcTIONS
• Prior to use, check all parts of the goal for damages and correct as-
sembly. In this regard, it is important to check the connecting elements
and screw connection for stability and fit. Any sharp edges that might
have formed must immediately be removed!
• Warning: do not climb on the goal frame or net or hang from the goal
posts. There is a serious risk of injury!
• Children should only use the product when they are under adult super-
vision.
No liability is assumed for damages resulting from incorrect application
of the instruction manual.
ASSeMBLY INSTrUcTION
Notice: Lubricate the connection assemblies on the narrow ends a bit
before starting the assembly. That facilitates the assembly and extends
the durability of the product!
1. Assembly of the goal frame
Assemble the goal frame as indicated in fig. 1. Observe that you use the
respectively numbered tubes.
2. Assembly of the goal net
The little flags sewed in the net indicate the upper goal corners. Fasten
the goal net on the goal frame by fastening the Velcro® fasteners sewed
in the net firstly on the tube parts 9 to 12. Then thread the cord as indica-
ted in fig. 2 around the tubes and knot the loose ends.
3. Assembly of the goal wall
Spread the goal wall and fasten it on the crossbar and the sides of the
goal frame by means of the gum cords and plastic clips; then secure with
pegs the bottom line on the ground as indicated in fig. 3. Pay attention
that the clips are on the back side of the goal wall so that they cannot be
hit by the ball.
All images are examples of the design.
High Score football goal
76095
9,4 kg
213 x 152 x 76 cm
HUDORA | Jägerwald 13 | 42897 Remscheid | Germany
4. Stand locking of the goal
Finally fix the goal frame by means of the pegs on the ground. Ascertain
that the ground is suitable for the application of pegs (e.g. no water pipes
for sprinkler devices!). Make sure that the pegs are completely driven into
the ground and have firm position. Avoid protruding fastenings (risk of
stumbling). On too hard grounds the goal must be saved by appropriate
measures in another way against overturning in order to prevent risk of
injuries (e.g. with slabs or sandbags). Never play with an unsecured goal
or never leave the goal unsecured respectively.
No liability is assumed for damages resulting from incorrect application
of the instruction manual.
USAGe INSTrUcTIONS
• Only set up the goal on level ground.
• Please keep a minimum distance of at least 3 m to any surrounding
obstacles.
• Secure the goal to keep it from toppling over – even if not in use.
• For repairs, please only use original parts
• Avoid exposing the product unnecessarily to bad weather conditions.
Keep it in a cool and dry storage area.
• Check for any rust on the product and remove it immediately. Pushing
together the metal parts could lead to the protective layer being scrat-
ched and rust developing.
MAINTeNANce AND STOrAGe
Use a dry or damp cloth only to clean the product; do not use special
cleaning agents! Check the product for damage or traces of wear and tear
before and after each use. Do not make any structural changes. For your
own safety, please use original spare parts only. These can be sourced
from HUDORA. If parts become damaged or if sharp edges or corners
should develop, the product may not be used any more. If in any doubt,
please contact our service team (http://www.hudora.de/).
Store the product in a safe place where it is protected from the elements,
cannot be damaged, and cannot injure anyone.
DISPOSAL ADVIce
At the end of the product's life, please dispose of it at an appropriate coll-
ection point provided in your area. Local waste management companies
will be able to answer your questions on this.
SerVIce
We make every effort to deliver faultless products. If faults do
arise however, we put just as much effort into rectifying them. There-
fore, you can find numerous information on the product, replace-
ment parts, solutions to problems and lost assembly manuals at
http://www.hudora.de/artnr/76095/.
SPAre PArTS AND OrIGINAL AcceSSOrIeS AVAILABLe AT:
http://www.hudora.de/artnr/76095/
www.hudora.de
Item no. 76095
As of 03/11
Page 4/8