Hamilton Beach 53602 Manual Del Usuario página 5

Parts and Features
Lid: The lid is easy to put on, take off, and clean. Always use lid
when machine is in operation and to pour.
Blender Jar: Ounces, cups, and milliliters are clearly marked.
ON(I)/OFF( ) (Power) Switch: The ON(I)/OFF( )
(power) switch is located on right-hand side of
blender base. This lighted switch controls power to
blender.
Program Buttons: There are three program settings:
SMOOTHIE, ICE CRUSH, and CLEAN. Select desired
program by pressing button for that program.
5 Speed Buttons: Five speeds start at LO and increase to HI.
PULSE Button: Press and hold down PULSE button
to blend at high speed setting.
CANCEL Button: Stops blender at any time.
Quiet Shield: The quiet shield reduces amount of
noise from your blender. When placed over blender
jar, it muffles sound that your blender produces.
Personal Blender Jar: The personal blender jar
makes it easier to make beverages to take on the go.
Base: Contains motor. DO NOT IMMERSE BASE IN WATER.
All manuals and user guides at all-guides.com
(cont.)
Preparing Blender: After unpacking blender, wash everything except
blender base in hot, soapy water. Dry thoroughly. Wipe blender base
with a damp cloth or sponge. DO NOT IMMERSE BASE IN WATER.
Care should be taken when handling cutting blade assembly since it
is very sharp. Refer to care recommendations on page 11.
IMPORTANT: Blender jar and cutting blade assembly are subject to
wear during normal use. Always inspect jar for nicks, chips, or cracks.
Always inspect cutting blade assembly for broken, cracked, or loose
blades. If jar or cutting blade assembly is damaged, do not use. Call
our customer care center to obtain replacement parts.
Selecting Blender Settings: Select from three program settings or 5
speed buttons from LO to HI.
w WARNING
Burn Hazard. Metal parts under
blending jar get hot after use.
Do not touch.
5