To Start Sewing - Verona 23011Y Manual Del Usuario

TO START SEWING

Important hints:
1. Raise the take-up lever to its highest position before starting and after stopping sewing.
2. Hold both threads about 10 cms to the rear of the machine for the first two or three
stitches.
3. Sufficient fabric should be placed under needle before lowering the presser foot.
4. Depress foot/speed control and start to sew.
5. Test the machine stitches on a scrap of fabric you plan to use, adjusting the machine
for the length of the stitch and tension suitable to your fabric.
6. Separate the machine from the power system if you leave it unsupervised.
7. When sewing the stretch stitches (
(do not press the foot controller to the bottom) & do not use fast speed to sew enabling
can get a good sewing result of stretch stitches.
Attention:
1. When turning the hand wheel manually, always turn it toward you.
2. Guide the cloth gently with your hand.
3. To prevent breaking needles, always raise the needle out of the fabric when you stop
sewing.
), please use slow to medium speed
20