Button Sewing; Binding - Verona 23011Y Manual Del Usuario

BUTTON SEWING (Optional)
Utilise the foot of sewing of buttons.

BINDING

Match
26
(Use feed cover plate see page 17)
1. Place the feed cover plate properly.
2. Place button presser foot in position
and attach it firmly.
3. Place the button between presser
foot and fabric and lower the presser
foot.
4. Manually turn hand wheel towards
you, ensuring that the needle enters
into both holes of button without
obstruction. (Increase or decrease
width setting).
5. Sew about 7 stitches.
6. Pull both threads to the underside
and tie them together.
To sew fabrics edge select the
multi-zigzag stitch.