Buttonhole Sewing - Verona 23011Y Manual Del Usuario

BUTTONHOLE SEWING

Utilise the foot of the buttonholes.
Set the stitch length dial.
Pattern selector dial
Before sewing, fit buttonhole foot
as shown.
Steps Settings
1. Set dial to "1" position
2. Sew left side
3. Raise the needle
4. Set dial to "2" position
5. Sew 5-6 stitches
6. Raise the needle
7. Set dial to "3" position
8. Sew right side
9. Raise the needle
10. Set dial to "4" position
11. Sew 5-6 stitches
12. Raise the needle
Cut buttonhole along centre with
cutter as shown.
28