Product Description; Assembly And Installation - NUKI KEYPAD 2.0 Guia De Instalacion

EN

Product description

The Nuki Keypad 2.0 offers the possibility to
operate other Nuki actuators, such as the Nuki
Smart Lock, by fingerprint or by entering an
access code. The device is battery powered and
connects to the actuator via Bluetooth.
Proper use
Compatible with Nuki Actuators.
Operating temperature: -20 – +70° C,
maximum humidity 95%, non-condensing.
Batteries: 4x AAA Alkaline (1,5V) or Lithium
(1,5V)
Any other use is deemed improper and shall
result in an exclusion of warranty and liability.

Assembly and installation

Information on assembly can be found in the
enclosed installation instructions.
To use the adhesive pad, the surface must be
cleaned (with residue-free cleaning agents)
and free of any grease.
If your surface is made of materials other
than metal or similarly smooth surfaces,
please contact our customer service.
13