Maintenance & Cleaning - san ignacio 43226 Manual De Instrucciones

OPERATING INSTRUCTIONS
• Connect the appliance to an appropriate socket.
• The control lights illuminate and the toasting surfaces heat up.
• The appliance must be heated up before grilling. In the meantime prepare your food.
• As soon as the appliance has heated up, the control light goes out.
• You can now begin grilling.
• Open the appliance using the handle.
• Close the appliance, making sure that the handle is engaged.
• Caution: if the foods have too much filling on, it will not be possible to close the
appliance. Take some of the filling off. Never use excessive pressure to close the
appliance.
• During toasting, the temperature thermostat switches off and on again. The control
light also switches off and on again.
• After completion of the grilling process (approx. 2-3 minutes) open and remove the
foods with the help of a flat wooden or plastic spatula. Never use sharp or metal
object (e. g. knives, metal spatulas, etc.) as this will damage the Teflon coating.
• If you wish to grill move food, close the appliance again and wait until the toasting
surfaces have reheated sufficiently.
• When the control light illuminates again you can repeat the toasting process as de-
scribed above.
• After completion of the grilling process disconnect the mains plug immediately.
With the appliance open allow it to cool down.
3. MAINTENANCE & CLEANING
• First, disconnect the mains plug.
• Only clean when the appliance has completely cooled down.
• Clean the housing surface and the toasting surfaces of the sandwich toaster with a
soft, damp cloth.
• It is easier to remove toasts or food crumbs with a very soft brush.
• Never use abrasive cleaning agents or sharp objects (e. g. scrubbing brush or knife)
for cleaning.
• Caution: do not immerse the appliance in water or other liquids. There is risk of
danger due to electric shock.