Select Either The Manual, Automatic Or Pilot Mode; Manual Mode - Rointe GIZA LCD TGILN40B080 Manual De Instalacion Y Uso

5.4. SELECT EITHER THE MANUAL, AUTOMATIC OR PILOT MODE*

(*ONLY UPON DEMAND)
To select either the MANUAL, PILOT and AUTO, AUTO 1, AUTO 2, AUTO 3 and AUTO 4
modes you need to press the
highlighted.
On the display panel, the
the icon will appear when you are in MANUAL mode and the
PILOT mode (not available).
00 01 02 03 04 05 06 07 08 09 10 11 AM

5.4.1. MANUAL MODE

When MANUAL mode is selected the set temperature, MANUAL mode icon, COMFORT/
ECO/ANTI-FROST icon and the time/day of the week will be displayed on the screen. The
set temperature and the hour will alternate every 5 seconds on the screen.
In MANUAL mode you can choose a set temperature and the corresponding COMFORT/
ECO/ANTI-FROST icon will appear on the screen according to the ranges below:
To adjust the set temperature:
Use the buttons to either increase or decrease the temperature respectively. When
you choose a temperature in the table above, the corresponding icon will appear on the
screen.
When the room temperature is lower than the set temperature on the display panel, the
product will display the
button and keep pressing until the mode you want is
icon will appear when you are in one of the AUTO modes (1-4),
COMFORT
ECO
ANTI-FROST
symbol in the top right of the screen.
GIZA LCD DIGITAL TOWEL RAIL
icon will appear when in
19 - 30 C
o
7.5 – 18.5 C
o
7 C
o
EN
17