Operation; Variant With Height Adjustment - Steelcase Flex Single Table Guía Rápida

4 Operating and adjusting
PLEASE NOTE
Risk of tipping over due to overload!
The table can tip over and cause material damage if the
maximum load-bearing capacity is exceeded.

4.2 Operation

4.2.1 Variant with height adjustment

The table can be variably adjusted to a height between 750
mm and 1185 mm.
Before changing the height of the table, ensure that:
EN
Downward adjustment of tabletop:
10
}
Comply with the maximum load-bearing capacity spe-
cification.
■
The tabletop is horizontal. The height is adjusted
using the adjusting screws on the sliders in the case
of uneven floors.
■
No people or objects (e.g. open doors or windows)
are in the lifting range, or protrude into in the lifting
range.
■
No one is on or under the table.
■
The maximum permissible load capacity of the table
is not exceeded.
1.
Remove all objects from the table.
2.
Place one hand on the tabletop.
3.
Pull the lever upwards.
4.
Press until the desired table height is reached.
5.
Release the lever.