Guarantee Card - BAHAG mixomat MX-BAD-SBS-64810-2 0620 Instrucciones De Montaje

materials. Dispose it in an environmentally
suitable manner. Do not throw the product
into the normal domestic waste at the end of
its service life, but ask your municipal adminis-
tration about the possibility of an environmen-
tally friendly disposal.
Installation Instructions
• Check all connections carefully after first-time
use to make sure that they are tight.
• We do not assume any warranty for incor-
rect installation - in particular for subsequent
damages!
 Shower settings
Use the diverter to set which shower mode is
activated (overhead shower or hand shower).
The slope of the overhead shower can be
set as desired by the user.
Instructions for care
Sanitary taps require special care. Therefore,
please observe the following instructions:
• Chrome-plated surfaces are sensitive to lime-
dissolving agents, acidic cleaning agents and
all kinds of abrasives.
• Never clean coloured surfaces with abrasive,
corrosive, or alcoholic agents.
• Only clean your taps with clear water and a
soft cloth or a shammy.
Maintenance
• Please check all joints and connections for
leaks or visible damages at regular intervals.
• In case of any leaks or visible damages to
the fitting or connection hoses, these should
be immediately checked by a specialist and
replaced if necessary.
Decommissioning
• Cut off the water supply before dismantling
the product.
• Pay attention to escaping residual water.
• Disassemble the product in the reverse order
of the assembly instructions.
 The illustrations are to be considered as
figurative representations, deviations of
the product are possible. Subject to
technical modifications.

GUARANTEE CARD

The BAHAG AG grants a manufacturer guaran-
tee for the tap you have acquired according
to the following guarantee conditions. This
guarantee does not limit your warranty claims
resulting from the sales contract with the ven-
dor as well as your statutory rights.
Guarantee conditions:
1. Scope of the guarantee
The BAHAG AG shall grant a warranty for
proper material qualities and material process-
ing in accordance with the intended purpose
as well as professional assembly, tightness
and function. The warranty shall only apply
for the country in which the product has been
procured.
Included within the scope of the warranty is a
guarantee, reduced to 1 year, for the durabil-
ity of non-high-gloss chrome-plated surfaces,
such as bronzed or coloured surfaces.
34