Charging Instructions; System Upgrade - XGIMI HALO Manual Del Producto

The whole frame of Android phones or Chrome browser on PC can be cast to the TV.
Note: Casting optimized for selected services only. Streaming quality for other content might
vary. Supported operating systems and devices: Android 2.3 and higher, iOS® 7 and higher,
Windows® 7 and higher, Mac OS® 10.7 and higher and Chrome OS (version 38 or higher).
9

Charging instructions

Device should be charged with an official, standardised adaptor.
Charging time will be lengthened for charging under power on state.
Plug into adapter under off state, and blinking red indicator light represents
charging while the green indicator light (green indicator light will extinguish
after it is on for 10s) represents that battery is fully charged.
In the case of long-term non-use of the device, the device should be fully
charged first. The power key of the device should be pressed for 5s to enter
battery protection mode (device cannot be started through remote control
under the mode) without plugging into the power cable. And the device shall
be charged once every 3 months to avoid irreversible capacity loss or
damage arising from low battery caused due to the self-discharge of battery
after excessively long storage time.
10

System upgrade

The system can only be upgraded with at least 50% battery level or
connection of power.
Online upgrade
The online upgrade can be made through system setting.
6