Stop The Machine; Adjust The Discharge Chute; Adjust The Chute Deflector; Led Headlights - GreenWorks Pro 2601302 Manual Del Operador

EN
8.3

STOP THE MACHINE

1. Release the bail switch (1) to stop the machine.
Wait until the impeller fully stops before you start the
machine again. Do not quickly turn the machine off
and on.
Remove the safety key and battery pack after you
complete the work.
8.4

ADJUST THE DISCHARGE CHUTE

10
You can adjust the discharge chute 180° to change the
snow direction.
1. Turn the grip handle (5) left to move the discharge
chute (10) to the left.
2. Turn the grip handle (5) right to move the discharge
chute (10) to the right.
WARNING
WARNING
5
English
8.5

ADJUST THE CHUTE DEFLECTOR

12
1
You can adjust the chute deflector up and down to
change the throwing distance of the snow.
Release the bail switch before you adjust the chute
deflector.
Do not push the trigger so far forward that a gap
shows between the deflector and the chute.
1. Push and hold the trigger on the chute deflector
(12).
2. Move the chute deflector (12) up to increase the
snow distance.
3. Move the chute deflector (12) down to decrease the
snow distance.
8.6

LED HEADLIGHTS

13
Turning the headlights on：
10
WARNING
WARNING
2
1