Checking The Delivery; Required Tools And Mounting Materials - Zehnder CO2 C55 Manual De Instalación

Model
CO C67 on­wall Sensor
2
CO RF67 on­wall (230V) Sensor
2
CO 0­10V67 on­wall Sensor
2

1.2 Checking the delivery

1. Check that the packaging is not damaged.
2. Check that the parts are not damaged.
3. Check that all items of the contents are present.
4. Check if the correct CO
Report damage, missing parts or incorrect delivery based on
the identification plate on the back of the CO
to your local Zehnder office. Contact details can be found at the back of this installation
manual.

1.3 Required tools and mounting materials

■ Screwdriver with a bit or screw head of the type PZ1
■ Screwdriver with a bit or screw head of the type PZ2
Box contents
■ 1x cover
■ 1x CO Sensor
2
■ 1x mounting frame
■ 1x surface­mounted box
■ 8x screws
■ 2x plugs
Sensor has been delivered.
2
Sensor (Figure 4.4 and Figure 4.5) directly
2
EN - 31