Description And Identification; General; Versions - Zehnder CO2 C55 Manual De Instalación

2. Description and identification

2.1 General

The CO Sensor measures the amount of CO
2
installed. The device sends the results to the ventilation system. If the CO
the system regulates the ventilation based on the maximum CO
air quality in the room is maintained.
Reducing high CO
quality and helps prevent headaches.
Multiple CO
type), section 6 (RF type) and section 7 (0­10V type). Are there multiple active CO
Sensors? If so then the ventilation rate is based on the CO
the highest ventilation requirement to the ventilation system.
The CO Sensor is a precision instrument with the best accuracy in its class. Each
2
sensor is individually calibrated for optimum performance. Shocks during installa­
tion or installation at higher elevations can temporarily affect the accuracy, but are
compensated for by the internal long­term compensation mechanisms.

2.2 Versions

Type
C
RF* (Radio
Frequency)
0­10V
* Not available in all countries.
For the pictures of the above models, see the Model column in section
1.1 Content of the box.
32 - EN
values in the air of the home is conducive to concentration, good sleep
2
Sensors can be used within one home. For setup, see section 5 (C
2
Power
12V DC via ComfoNet
230V AC
12V DC from the ventila­
tion unit
in the air of the room in which this sensor is
2
Variant
55mm installation
67mm installation
67mm assembly
55mm installation
67mm installation
67mm assembly
55mm installation
67mm installation
67mm assembly
level is too high,
2
values. As a result, healthy
2
Sensor that transmits
2
Model/name
CO C55 Sensor
2
CO C67 Sensor
2
CO C67 on­wall Sensor
2
CO RF55 (230V) Sensor
2
CO RF67 (230V) Sensor
2
CO RF67 on­wall (230V) Sensor
2
CO 0­10V55 Sensor
2
CO 0­10V67 Sensor
2
CO 0­10V67 on­wall Sensor
2
2