Adjusting The Mowing Height - Makita GML01 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Adjusting the mowing height

WARNING:
Never put your hand or leg under
the mower body when adjusting the mowing
height.
WARNING:
Always make sure that the lever
fits in the groove properly before operation.
The mowing height can be adjusted in the range of
between 32 mm (1-1/4") and 100 mm (3-15/16").
Turn off the machine, and then pull the mowing height
adjusting lever outward of the mower body and move it
to your desired mowing height.
1
Fig.23
► 1. Mowing height adjusting lever
The table below shows the relationship between the
number on the mower body and the approximate mow-
ing height.
Number
1
2
3
4
5
6
7
8
Mowing height
32 mm (1-1/4")
39 mm (1-9/16")
47 mm (1-7/8")
55 mm (2-3/16")
63 mm (2-1/2")
74 mm (2-15/16")
86 mm (3-3/8")
100 mm (3-15/16")
13 ENGLISH
Hold the lower handle with one hand, and then move
the mowing height adjusting lever with the other hand.
1
Fig.24
► 1. Mowing height adjusting lever 2. Lower handle
NOTE: The mowing height figures should be used
just as a guideline. Depending on the conditions of
the lawn or the ground, the actual lawn height may
become slightly different from the set height.
NOTE: Try a test mowing of grass in a less conspicu-
ous place to get your desired height.
Grass level indicator
Grass level indicator shows the volume of mowed
grass. When the grass basket is not full, the indicator
floats while the blades are running.
1
Fig.25
► 1. Grass level indicator
When the grass basket is almost full, the indicator does
not float while the blades are running. In this case, stop
the operation immediately and empty the basket.
1
Fig.26
► 1. Grass level indicator
2

Publicidad

Tabla de contenido
loading

Tabla de contenido