Expansion Kit - CARLO GAVAZZI PAM Manual Del Usuario

It is possible to extend the number of channels up to 10 channels (5
sensor modules). When having a 6 channel amplifier and an expansion
kit, the procedure is as described below.
1) Remove the label in the right upper corner of the cover.
2) Place the expansion kit close to the right side of the amplifier.
3) Connect the cable which is delivered together with the expansion
kit between the amplifier and the expansion kit.
4) Check the positions of the "BUS" jumpers; must be "OUT"
on the amplifier and "IN" on the expansion kit (factory default
setting).
8

Expansion Kit