Brevetti Montolit F2 Manual De Instrucciones página 11

3.6 Wear the right work clothes
• When working outdoors, you should wear rubber
gloves and footwear with non-slip soles. If you
have long hair, tie it up or use a protective cap.
Wear protective goggles.
• Also use a facemask if the work you are doing
causes dust.
• Use proper ear protection.
• Do not wear baggy clothes or jewels that could
get caught in moving components.
3.7 Do not use the power cord incorrectly
• Do not unplug the machine by lifting it up or pull-
ing it.
• Keep the cord away from high temperatures, oil
and square edges.
• Avoid unsafe postures.
Always keep your body in a safe, balanced posi-
tion.
3.8 Take good care of your tools
• Keep your tools sharp and clean so that you can
work better and more safely.
• Observe the maintenance instructions and
changes of setup.
Regularly check the condition of the power cord,
and if it is damaged, get a qualified and author-
ized technician to change it.
Regularly check extension cords and change
them if they are damaged. Keep the grips dry
and clean them of any oil or grease.
3.9 Remove the plug from the socket
• Remove the plug from the socket when not using
the machine, before doing any repairs and when
changing accessories.
• Only use in combination with a differential I∆N
0,01A.
• Before switching on the machine make sure all
spanners and other adjustment tools have been
removed.
3.10 Avoid involuntary start-up
• Make sure that the switch is off when plugging
the machine in.
ENGLISH
3.11 Always be alert
• Watch what you are doing.
Use your common sense and do not use the ma-
chine if distracted.
3.12 Make sure the machine is not damaged
• Before using the machine again, carefully check
the safety components and pieces that might be
damaged.
Make sure the moving pieces work correctly,
and do not seize up, and that other parts are not
broken; ensure that all of the parts are correctly
assembled and in the correct condition to guar-
antee that the machine will work impeccably.
• All damaged safety components or other parts
should be repaired or replaced in the proper way
by an after sales service workshop, unless indi-
cated otherwise in the instructions manual.
• Defective switch should be replaced by an after
sales service workshop.
WARNING!
Using different accessories to those mentioned
in the instruction manual or recommended in the
manufacturers catalogue could implicate a risk
of personal injury.
3.13 Get the machine fixed by qualified
personnel
• This electrical appliance meets all of the current
and relevant safety regulations.
All repairs should only be made by qualified per-
sonnel using original spare parts - not doing this
could put the user in considerable danger.
11