Problem Solving - Brevetti Montolit F2 Manual De Instrucciones

5. PRECAUTIONS
RECOMMENDATIONS!
The manufacturer accepts no responsibility for the
use of the electric tile cutter with different tools or
for cutting unspecified materials.
The machine was designed exclusively for use
in accordance with the CONSENTED OPERATION
conditions indicated in the "TECHNICAL DETAILS"
paragraph. Therefore, when cutting, position the
machine as specified.
The machine was not designed for heavy and con-
tinued use.
Brevetti MONTOLIT S.p.A. reserves the right to
introduce any technical modifications without prior
warning.
This electric tool complies with the relevant safety rules. Repairs should only be carried out by quali-
fied persons using original spare parts, otherwise this may result in considerable danger to the user.
Problem
The power cord is badly connected or damaged
The machine
does not work
The power socket does not supply
The switch is damaged
The motor has no power and gives off a bad
smell
The diamond blade has bent due to incorrect
The machine
use
does not start
properly
The starting capacitor is damaged
The motor's bearings are damaged
ENGLISH
5.1 Avoid risks
• CAREFULLY FOLLOW THE REGULATIONS IN PLACE
REGARDING HEALTH AND SAFETY IN THE WORK-
PLACE
• The use of individual hearing protectors is man-
datory as per Directive 2003/10/CE.
• The vibrations produced by the machine and
evaluated according to regulation UNI-EN-ISO
5349-1-2004 are considered to be irrelevant.

6. PROBLEM SOLVING

Cause
13
Solution
Push the switch in fully, check the
power cord
Check the power socket
See a reliable salesperson
See a reliable salesperson
Change the diamond blade
See a reliable salesperson
See a reliable salesperson