RECOMMENDATIONS
•
Install the sauna on a perfectly flat surface.
•
The sauna must remain in a dry area. Do not use it near a source of water (bath, damp floor, swimming
pool).
•
Do not use liquid cleaning products. Disconnect the sauna before cleaning and use a wet rag. (see
Maintenance section)
•
Protect the sauna's electrical cable to avoid it being crushed or pinched.
•
Prior to replacing certain components, ensure that they are specified by the manufacturer or that they
have the same features as the original parts. Incorrect replacement can cause a fire, a short circuit or
damage to the sauna. We strongly recommend using a qualified technician.
•
To avoid the risk of burns or electric shocks, do not use any metal tools and do not touch the infrared
emitters.
•
Do not get wet in the sauna.
•
Do not put animals in the sauna.
•
Do not dry linen in the sauna ( fire hazard)
•
Do not leave the sauna switched on without supervision.
•
Do not leave the sauna switched on for more than 3 hours at a time to avoid premature deterioration of
the equipment. After 3 hours continuous usage, switch off the sauna for at least one hour.
•
We recommend that you do not install a locking system on the sauna door.
•
Check compliance of your electrical installation prior to connecting your sauna to the power supply.
16