BSVILLAGE GALATEA SN-SAULO1 Manual Del Usuario página 22

RECTANGULAR DESIGN
22
Step 7
Now install the front panel of the sauna. It fits together
using locking tabs.
Step 8
After clearing the cables to the outside of the cabin, posi-
tion the roof above the cabin carefully so as not to damage
the temperature sensor.
Step 9
Connect the cables to the control box according to
their code (Cable A → Load A, Cable B → Load B, ...).
The remaining cables must be connected respecting
the number of pins present on each connector.
Once the connections have been made, place the pro-
tective plywood on the roof.*
Some cables do not connect to
anything depending on the options
available in your cabin.