Installation; Environmental Operating Conditions - Cole-Parmer OS-200D-C-SYS Manual Del Usuario

Installation

Stand Assembly
Remove lock nut. Insert the threaded end of the stand rod into the stand base.
Turn rod clockwise to tighten. Secure with lock nut.
Mixer Installation
Slide the clamp opening over the top of the stand rod. Lower to desired height.
Turn clamp knob to securely tighten the mixer onto the stand rod. Connect sup-
plied power cord to mixer. Connect power cord to a grounded electrical outlet.
Impeller Assembly
Add impeller blade(s) to impeller shaft. Tighten screw to secure.
Impeller Installation
Insert impeller shaft into collet opening until it stops. Tighten set screw.

Environmental Operating Conditions

The stirrer must operate in the following conditions:
Indoors
1. Altitudes up to 2000 m (6500 ft.).
2. Temperatures from 5ºC to 40ºC (41ºF to 104ºF).
3. Maximum relative humidity 80% for temperatures up to 31ºC (88ºF) decreasing
linearly to 50% relative humidity at 40ºC (104ºF).
4. Pollution degree 2 in accordance with IEC 664.
5