Protecting The Environment; Technical Data; Ec Declaration Of Conformity - Stanley FATMAX FME380 Traducido De Las Instrucciones Originales

@
Warning! Before performing any maintenance
on the tool, unplug the tool. Unplug the charger
before cleaning it.
● Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
● Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
● Safely dispose of the old plug.
● Connect the brown lead to the live terminal in the
new plug.
@
● Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the
earth terminal. Follow the fitting instructions
supplied with good quality plugs.
Recommended fuse: 5 A.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com

Technical data

Voltage
No-load speed
Rated Power
Blade size
Max cutting depth (soft wood)
Max cutting depth (tile)
Max cutting depth (aluminium)
Level of sound pressure according to EN 62841:
Circular saw function: Sound pressure (L
Sound power (L ) 103,5 dB(A), uncertainty (K) 3 dB(A)
W
Cutting off machine function: (L ) 97 dB(A) , uncertainty (K) 3 m/s
p
Sound power (L ) 108 dB(A), uncertainty (K) 3 dB(A)
W
Vibration total values (triax vector sum) according to EN 62841:
Cutting wood (a ) 2.4 m/s , uncertainty (K) 1,5 m/s
2
h
Cutting metal (a ) 5.5 m/s uncertainty (K) 1,5 m/s
2
h,M
Cutting conrete slab (a ) 5,5 m/s , uncertainty (K) 1,5 m/s
2
h
FME380
V
AC
min
-1
W
mm
mm
mm
mm
) 92,5 dB(A), uncertainty (K) 3 dB(A)
p
2
2
2
2

EC declaration of conformity

STANLEY FATMAX declares that these products described
under "technical data" are in compliance with:
EN62841-1:2015 , EN62841-2-5:2014.
These products also comply with Directive 2006/42/EC,
2014/30/EU and 2011/65/EU. For more information, please
contact STANLEY FATMAX at the following address or refer to
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY FATMAX Europe, Egide Walschaertsstraat14-18,
Guarantee
STANLEY FATMAX is confident of the quality of its products
230
and offers consumers a 12 month guarantee from the date
4500
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
650
the territories of the Member States of the European Union
89
and the European Free Trade Area.
28.5
To claim on the guarantee, the claim must be in accordance
8
with STANLEY FATMAX Terms and Conditions and you will
3 need to submit proof of purchase to the seller or an authorised
repair agent.
Terms and conditions of the STANLEY FATMAX 1 year
guarantee and the location of your nearest authorised repair
agent can be obtained on the Internet at www.2helpU.com,
or by contacting your local STANLEY FATMAX office at the
address indicated in this manual.
Please visit our website www.stanleytools.eu/3 to register your
new STANLEY FATMAX product and receive updates on new
products and special offers.
(original instructions)
%
MACHINERY DIRECTIVE
FME380 Circular Saw
the back of the manual.
STANLEY FATMAX.
Technical Director
2800 Mechelen, Belgium
English
A. P. Smith
08/06/2019
13