Sauder 429357 Instrucciones De Montaje página 13

Step 9
å
Carefully stand your desk upright.
å
1. Insert the remaining PIVOT HINGE (20) into the HINGE
BUSHING (22) and into the BOTTOM (S).
å
2. Insert the PIVOT HINGE, which is fastened to the
DOOR (T), into the hole in the SHELF (R). You will need
to tilt your DOOR slightly. Now, tip the DOOR (T) in and
fasten the free PIVOT HINGE (20) to the DOOR. Use a
1/2" FLAT HEAD SCREW (29).
å
NOTE: To make adjustments to the DOOR, loosen the
SCREWS in the HINGE, make needed adjustments, and
tighten the SCREW.
å
Fasten the PULL (23) to the DOOR (T). Use two 3/4" PAN
HEAD SCREWS (28).
429357
29
1/2" FLAT HEAD SCREW
(1 used in this step)
www.sauder.com/service
Pro Tip: Lift with your
legs. And, you know,
your arms.
2
ND
R
T
S
20
1
ST
22
3/4" PAN HEAD SCREW
(2 used for the PULL)
23
28
Page 13