Descargar
Compartir
Imprimir esta página
Sauder Englewood 426914 Manual De Instrucciones
  1. Manuales
  2. Marcas
  3. Sauder Manuales
  4. Muebles de Interior
  5. Englewood 426914
  6. Manual de instrucciones
Sauder Englewood 426914 Manual De Instrucciones

Sauder Englewood 426914 Manual De Instrucciones

Ocultar thumbs

Publicidad

Enlaces rápidos

Descargar este manual
CONTACT US FIRST
CONTACT US FIRST
sauder.com
sauder.com
sauder.com
BEFORE MAKING ANY RETURNS TO THE STORE.
BEFORE MAKING ANY RETURNS TO THE RETAILER.
sauder.com/service
Visit
Prefer the phone? Give us a ring at
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
L-Desk
Englewood Collection | Model 426914
Sauder.com
Share your journey!
to order replacement parts, view video assembly tips, or chat with a live rep.
1-800-523-3987
.
For all your
newfangled gadgetry.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-52
Français pg 53-60
Español pg 61-68
Lot # 545347
06/03/20
Purchased: __________________

Publicidad

loading

Manuales relacionados para Sauder Englewood 426914

Resumen de contenidos para Sauder Englewood 426914

  • Página 1 CONTACT US FIRST CONTACT US FIRST sauder.com sauder.com sauder.com BEFORE MAKING ANY RETURNS TO THE STORE. BEFORE MAKING ANY RETURNS TO THE RETAILER. sauder.com/service Visit to order replacement parts, view video assembly tips, or chat with a live rep. 1-800-523-3987 Prefer the phone? Give us a ring at Customer Service is available Monday-Friday - 9 a.m.
  • Página 2 Table of Contents Assembly Tools Required Part Identification No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identification Assembly Steps 6-52 Hammer Not actual size Français 53-60 Español 61-68 Safety 69-70 Tape Measure Warranty Adjustable Wrench Page 2 426914 www.sauder.com/service...
  • Página 3 D109 SMALL DRAWER BACK (2) MODESTY PANEL (1) LOCKING DRAWER FRONT (1) D130 SMALL RIGHT DRAWER SIDE (2) SMALL MODESTY PANEL (1) D136 SMALL LEFT DRAWER SIDE (2) RIGHT BASE (2) D109 D130 D708 D136 D708 www.sauder.com/service 426914 Page 3...
  • Página 4 FILE GLIDE - 2 FILE ROD - 2 CAM DOWEL - 16 CAM - 16 WOOD TWIST-LOCK METAL CORNER ® CONNECTOR PLATE - 2 DOWEL - 10 FASTENER - 12 BRACKET - 4 BRACKET - 8 Page 4 426914 www.sauder.com/service...
  • Página 5 BLACK 1/2" FLAT HEAD SCREW - 4 SILVER 1-1/8" FLAT HEAD SCREW - 6 30S BLACK 1-9/16" FLAT HEAD SCREW - 12 BLACK 2-1/4" FLAT HEAD SCREW - 4 102S SILVER 1" LARGE HEAD SCREW - 4 www.sauder.com/service 426914 Page 5...
  • Página 6 NOTE: The dowel end of the FASTENER must into the large hole in the part. remain fully inserted in the hole of the adjoining part while locking the FASTENER. 2. Tighten the FASTENER with a Phillips screwdriver as tight as possible. Dowel end Page 6 426914 www.sauder.com/service...
  • Página 7 Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Push two SAUDER TWIST-LOCK® FASTENERS (36F) into the large holes in the MODESTY PANEL (L). å Push three HIDDEN CAMS (1F) into the MODESTY PANEL (L). Then, insert the metal end of a CAM DOWEL (2F) into each HIDDEN CAM.
  • Página 8 Step 2 å Fasten the MODESTY PANEL (L) to the LARGE UPRIGHT (G). Tighten three HIDDEN CAMS. S u r f a c i t h H I D D E N Edge with TWIST-LOCK® FASTENERS Page 8 426914 www.sauder.com/service...
  • Página 9 • Apple (iPhone 8 or newer) • Samsung (Galaxy 6 or newer) • For a complete compatibility list, go to sauder.com. å You have the option to fasten the Wireless Charger to the TOP (C) or SMALL TOP (D). If you did not purchase the optional Hidden Wireless Qi Compatible Charger by Eggtronic, go to Step 5.
  • Página 10 "Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device". "Changes or modifications not expressly approved by Sauder Woodworking Co. could void the user's authority to operate this device".
  • Página 11 å Fasten the MODESTY PANEL (L) and LARGE UPRIGHT (G) to the TOP (C). Tighten three HIDDEN CAMS Remember: and two SAUDER TWIST-LOCK® FASTENERS. Righty tighty. Lefty loosey. å Push a CORD CLIP (4P) into the hole in the TOP (C).
  • Página 12 Step 6 å Push four SAUDER TWIST-LOCK® FASTENERS (36F) into the large holes in the LEFT END (B) and LEFT UPRIGHT (F). å Insert four WOOD DOWELS (15F) into the LEFT END (B) and LEFT UPRIGHT (F). Groove Page 12 426914 www.sauder.com/service...
  • Página 13 Push the black lever in and pull the SLIDE from the RAIL. BLACK 9/16" LARGE HEAD SCREW (2 used in this step) Open end GOLD 5/16" FLAT HEAD SCREW (4 used for the RAILS) Groove Open end www.sauder.com/service 426914 Page 13...
  • Página 14 UPRIGHT (F) and the CABINET LEFT (40CB) to the LEFT END (B). Use eight GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #4. Roller end GOLD 5/16" FLAT HEAD SCREW (8 used for the RAILS) Roller end Page 14 426914 www.sauder.com/service...
  • Página 15 Step 9 å Fasten the LEFT UPRIGHT (F) to the TOP (C). Tighten two SAUDER TWIST-LOCK® FASTENERS. å NOTE: Be sure the WOOD DOWELS in the LEFT UPRIGHT insert into the TOP. å Fasten the LEFT UPRIGHT (F) to the MODESTY PANEL (L).
  • Página 16 Step 10 å Push the LEFT BACK (S) into the groove of the LEFT UPRIGHT (F). U n fi n i s h s u r f a c Page 16 426914 www.sauder.com/service...
  • Página 17 Push four HIDDEN CAMS (1F) into the LEFT BOTTOM (R). Then, insert the metal end of a CAM DOWEL (2F) into each HIDDEN CAM. Do not tighten the HIDDEN CAMS in this step. Arrow Metal end Arrow Metal end www.sauder.com/service 426914 Page 17...
  • Página 18 Step 12 å Fasten the LEFT BOTTOM (R) to the LEFT UPRIGHT (F). Tighten two HIDDEN CAMS. å NOTE: Be sure the LEFT BACK (S) inserts into the groove of the LEFT BOTTOM (R). Page 18 426914 www.sauder.com/service...
  • Página 19 Step 13 å Fasten the LEFT END (B) to the TOP (C) and LEFT BOTTOM (R). Tighten two SAUDER TWIST-LOCK® FASTENERS. and two HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the LEFT END insert into the TOP.
  • Página 20 Fasten four CORNER BRACKETS (31G) to the LEFT BOTTOM (R) exactly as shown. Use eight BLACK 9/16" LARGE HEAD SCREWS (1S). å NOTE: Do not tighten the screws at this time. BLACK 9/16" LARGE HEAD SCREW (8 used in this step) Page 20 426914 www.sauder.com/service...
  • Página 21 BLACK 9/16" LARGE HEAD SCREW The edges of the (12 used in this step) BRACKETS should be even with the short edge of the BASES. The edges of the BRACKETS should be even with the short edge of the BASES. www.sauder.com/service 426914 Page 21...
  • Página 22 SIDE BASES (P). å Tighten all SCREWS through the BRACKETS. BLACK 9/16" LARGE HEAD SCREW (8 used in this step) These surfaces should be even. These surfaces should be even. Page 22 426914 www.sauder.com/service...
  • Página 23 Step 17 å Fasten two CONNECTOR PLATES (14G) to the TOP (C). Use eight BLACK 9/16" LARGE HEAD SCREWS (1S). BLACK 9/16" LARGE HEAD SCREW (8 used in this step) www.sauder.com/service 426914 Page 23...
  • Página 24 Step 18 å Push two SAUDER TWIST-LOCK® FASTENERS (36F) into the large holes in the SMALL MODESTY PANEL (M). å Push two HIDDEN CAMS (1F) into the SMALL MODESTY PANEL (M). Then, insert the metal end of a CAM DOWEL (2F) into each HIDDEN CAM.
  • Página 25 Step 19 å Fasten the SMALL MODESTY (M) to the SMALL TOP (D). Tighten two SAUDER TWIST-LOCK® FASTENERS (36F). å Push a CORD CLIP (4P) into the hole in the SMALL TOP (D). å NOTE: The CORD CLIP is used to hold a cord to the SMALL TOP.
  • Página 26 "Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device". "Changes or modifications not expressly approved by Sauder Woodworking Co. could void the user's authority to operate this device".
  • Página 27 Step 21 å Push four SAUDER TWIST-LOCK® FASTENERS (36F) into the large holes in the RIGHT END (A) and RIGHT UPRIGHT (E). å Insert four WOOD DOWELS (15F) into the RIGHT END (A) and RIGHT UPRIGHT (E). Groove www.sauder.com/service 426914...
  • Página 28 Step 22 å Fasten the RIGHT UPRIGHT (E) to the SMALL TOP (D). Tighten two SAUDER TWIST-LOCK® FASTENERS. å NOTE: Be sure the WOOD DOWELS in the RIGHT UPRIGHT insert into the TOP. å Fasten the RIGHT UPRIGHT (E) to the SMALL MODESTY PANEL (M).
  • Página 29 Step 23 å Push the RIGHT BACK (T) into the groove of the RIGHT UPRIGHT (E). www.sauder.com/service 426914 Page 29...
  • Página 30 Step 24 å Push four HIDDEN CAMS (1F) into the RIGHT BOTTOM (J). Then, insert the metal end of a CAM DOWEL (2F) into each HIDDEN CAM. Arrow Metal end Arrow Metal end Page 30 426914 www.sauder.com/service...
  • Página 31 Step 25 å Fasten the RIGHT BOTTOM (J) to the RIGHT UPRIGHT (E). Tighten two HIDDEN CAMS. å NOTE: Be sure the RIGHT BACK (T) inserts into the groove of the RIGHT BOTTOM (J). www.sauder.com/service 426914 Page 31...
  • Página 32 Step 26 å Fasten the RIGHT END (A) to the SMALL TOP (D) and RIGHT BOTTOM (J). Tighten two SAUDER TWIST-LOCK® FASTENERS and two HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the RIGHT END insert into the TOP.
  • Página 33 Don't worry. It isn't LARGE HEAD SCREWS (1S). Rome. This can be built in a day. å NOTE: Do not tighten the screws at this time. BLACK 9/16" LARGE HEAD SCREW (8 used in this step) www.sauder.com/service 426914 Page 33...
  • Página 34 BLACK 9/16" LARGE HEAD SCREW (12 used in this step) The edges of the BRACKETS should be even with the short edge of the BASES. The edges of the BRACKETS should be even with the short edge of the BASES. Page 34 426914 www.sauder.com/service...
  • Página 35 SIDE BASES (P). å Tighten all SCREWS through the BRACKETS. BLACK 9/16" LARGE HEAD SCREW (8 used in this step) These surfaces should be even. These surfaces should be even. www.sauder.com/service 426914 Page 35...
  • Página 36 Fasten the SMALL MODESTY PANEL (M) to the LARGE UPRIGHT (G). Use six SILVER 1-1/8" FLAT HEAD SCREWS (10S). BLACK 9/16" LARGE HEAD SCREW (8 used for the CONNECTOR PLATES SILVER 1-1/8" FLAT HEAD SCREW (6 used the MODESTY PANELS) Page 36 426914 www.sauder.com/service...
  • Página 37 Step 31 å Fasten two HINGES (14H) to the DOOR (V). Use four BLACK 1/2" FLAT HEAD SCREWS (11S). BLACK 1/2" FLAT HEAD SCREW (4 used in this step) www.sauder.com/service 426914 Page 37...
  • Página 38 å Fasten a PULL (189K) to the DOOR (V). Use two BLACK 9/16" LARGE HEAD SCREWS (1S). å See the next step for DOOR adjustments. BLACK 9/16" LARGE HEAD SCREW (2 used for the PULL) 189K Page 38 426914 www.sauder.com/service...
  • Página 39 Tighten the screws after making adjustments. å To adjust the DOORS in or out (depth), loosen the mounting screw one turn and move the DOORS in or out, as needed. Tighten the mounting screw after making adjustments. www.sauder.com/service 426914 Page 39...
  • Página 40 (4 used for the KEYBOARD RAILS) sure the flanges of the RAILS are facing away from each other.. Open end facing out Keyboard to Left Keyboard to Right The RAILS fasten to the TOP (C) only in this option Page 40 426914 www.sauder.com/service...
  • Página 41 Fasten the KEYBOARD SLIDES (Z) to the KEYBOARD SHELF (Q). Use four SILVER 1" LARGE HEAD SCREWS (102S). Open end Open end These edges should be even. 102S SILVER 1" LARGE HEAD SCREW (4 used for the KEYBOARD SLIDES www.sauder.com/service 426914 Page 41...
  • Página 42 Fasten the Z-LOCK BRACKET (77G) to one of the SMALL DRAWER FRONTS (U) exactly as shown. Use two BLACK 9/16" LARGE HEAD SCREWS (1S). å Repeat this step for the other small drawer without the Z-LOCK BRACKET (77G). Page 42 426914 www.sauder.com/service...
  • Página 43 (4 used) D136 189K Roller end D130 BLACK 9/16" LARGE HEAD SCREW (4 used in this step) Drawer Slide GOLD 5/16" FLAT HEAD SCREW (8 used for the SLIDES) Center the screw in the oval hole. www.sauder.com/service 426914 Page 43...
  • Página 44 Fasten the LARGE DRAWER BACK (D78) to the DRAWER SIDES (D87 and D88). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S). å NOTE: Be sure the DRAWER BOTTOM (D708) inserts into the groove of the DRAWER BACK (D78). Page 44 426914 www.sauder.com/service...
  • Página 45 SLIDES with holes in DRAWER SIDES Open end BLACK 9/16" LARGE HEAD SCREW (2 used in this step) Drawer Slide GOLD 5/16" FLAT HEAD SCREW (4 used for the SLIDES) Center the screw in the oval hole. www.sauder.com/service 426914 Page 45...
  • Página 46 Slide another FILE GLIDE (6B) onto the other end of the FILE RODS (8B), then press this FILE GLIDE over the LARGE LEFT DRAWER SIDE (D88). Insert the FILE RODS into the holes of your choice in the FILE GLIDES, depending on your file sizes. Page 46 426914 www.sauder.com/service...
  • Página 47 NOTE: It is important to position the CAM exactly as shown. å NOTE: Turn the KEY clockwise to lock. WASHER SCREW The prongs must press into the FILE DRAWER FRONT as you tighten the NUT with an Adjustable Wrench. LOCK KEYS www.sauder.com/service 426914 Page 47...
  • Página 48 To cover HIDDEN CAMS (6 used) This drawer must have the Z-LOCK BRACKET. (6 used) To cover screws Place the roller on the SLIDE behind the roller on the RAIL. Page 48 426914 www.sauder.com/service...
  • Página 49 METAL PINS (1R). Insert the METAL PINS into the hole locations of your choice in the RIGHT END (A) and RIGHT UPRIGHT (E). Set the ADJUSTABLE SHELF (K) onto the METAL PINS. 25 lbs. 20 lbs. 35 lbs. 20 lbs. 35 lbs. (4 used) www.sauder.com/service 426914 Page 49...
  • Página 50 #4. The higher the screw in the oblong hole, the higher your drawer front will be. The lower the screw, the lower the drawer front. Page 50 426914 www.sauder.com/service...
  • Página 51 NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly. Clean with a damp cloth. Wipe dry. And to celebrate, why not share your success story at sauder.com or STOP The STICKER...
  • Página 52 (IF ANY SOUND, THEN SECTION A IS NOT THE ISSUE) (IF NO SOUND, THEN ISSUE IS IN SECTIONS A OR B) (normal conditions: one single beep when charging starts) 17) Is the smartphone correctly aligned with the charging spot? (normal conditions: yes) Page 52 426914 www.sauder.com/service...
  • Página 53 (SI ABSENCE DE SON. LE PROBLÈME SE TROUVE DANS LA SECTION A OU B) (conditions normales : un seul bip quand le chargeur démarre) 17) Le smartphone est-il correctement aligné sur le point de charge ? (conditions normales : oui) www.sauder.com/service 426914 Page 53...
  • Página 54 QUANTITÉ conserver le livret pour future référence. Pour (ENSEMBLE DE GLISSIÈRE DE TABLETTE DE CLAVIER ILLUSTRÉ À PART) contacter Sauder en EXTRÉMITÉ DROITE ................1 GLISSIÈRE DROIT DE TABLETTE DE ce qui concerne cet EXTRÉMITÉ GAUCHE ................ 1 CLAVIER....................1 élément, faire référence...
  • Página 55 Ne pas serrer les FIXATIONS TWIST-LOCK® à cette étape. • ÉVITER de faire tomber Enfoncer deux FIXATIONS TWIST-LOCK® SAUDER (36F) dans les gros trous du VOILE DE FOND (L). • NE JAMAIS utiliser dans ou près de l'eau Enfoncer trois EXCENTRIQUES ESCAMOTABLES (1F) dans le VOILE •...
  • Página 56 Fixer le DESSOUS GAUCHE (R) au MONTANT GAUCHE (F). Serrer deux EXCENTRIQUES ESCAMOTABLES. Enfoncer quatre FIXATIONS TWIST-LOCK® SAUDER (36F) dans les REMARQUE : S'assurer que l’ARRIÈRE GAUCHE (S) s'encastre gros trous de l'EXTRÉMITÉ GAUCHE (B) et du MONTANT GAUCHE (F).
  • Página 57 ÉTAPE 18 ÉTAPE 21 Enfoncer deux FIXATIONS TWIST-LOCK® SAUDER (36F) dans les Enfoncer quatre FIXATIONS TWIST-LOCK® SAUDER (36F) dans les gros trous du PETIT VOILE DE FOND (M). gros trous de l'EXTRÉMITÉ DROITE (A) et du MONTANT DROIT (E). Enfoncer deux EXCENTRIQUES ESCAMOTABLES (1F) dans Insérer quatre CHEVILLES EN BOIS (15F) dans l’EXTRÉMITÉ...
  • Página 58 EXCENTRIQUES ESCAMOTABLES. les PORTES vers l'intérieur ou vers l'extérieur. Serrer la vis de montage après avoir ajusté. Fixer le PETIT VOILE DE FOND (M) au GRAND MONTANT (G). Utiliser six VIS TÊTE PLATE 28 mm ARGENTÉES (10S). Page 58 426914 www.sauder.com/service...
  • Página 59 à travers le trou fendu dans la COULISSE. PETIT TIROIR (U) exactement comme il l’est indiqué. Utiliser deux VIS TÊTE LARGE 14 mm NOIRES (1S). Répéter cette étape pour l'autre petit tiroir sans la CONSOLE DE VERROU EN Z (77G). www.sauder.com/service 426914 Page 59...
  • Página 60 Centrer un COUVERCLE DE VIS (21P) sur la tête de chaque Ceci complète l'assemblage. Nettoyer avec un tissu humide. Essuyer. VIS et un COUVERCLE D'EXCENTRIQUE (92P) sur chaque EXCENTRIQUE ESCAMOTABLE et taper délicate Page 60 426914 www.sauder.com/service...
  • Página 61 (SI NO HAY SONIDO, ENTONCES EL PROBLEMA ESTÁ EN LAS SECCIONES A O B) (condiciones normales: un solo pitido cuando se inicia la carga) 17) ¿El teléfono inteligente está alineado correctamente con el punto de carga? (condiciones normales: sí) www.sauder.com/service 426914 Page 61...
  • Página 62 EXTREMO IZQUIERDO ..............1 EXCÉNTRICO DE CORREDERA ........6 necesita ponerse en PANEL SUPERIOR ................. 1 CORRIMIENTO DE ARCHIVERO ........2 contacto con Sauder en PANEL SUPERIOR PEQUEÑO ............. 1 VARILLA DE ARCHIVERO ............2 cuanto a esta unidad, DORSO DE CAJÓN GRANDE ............1 EXCÉNTRICO ESCONDIDO ..........16...
  • Página 63 • NO desarmar No apriete los SUJETADORES TWIST-LOCK® en este paso. • NO exponer a líquidos Empuje dos SUJETADORES TWIST-LOCK® SAUDER (36F) en los • NO lo use con un cable de extensión agujeros grandes del VELO DE FONDO (L).
  • Página 64 PANEL SUPERIOR. PASO 10 PASO 6 Empuje el DORSO IZQUIERDO (S) en la ranura del Empuje cuatro SUJETADORES TWIST-LOCK® SAUDER (36F) en PARAL IZQUIERDO (F). los agujeros grandes del EXTREMO IZQUIERDO (B) y del PARAL IZQUIERDO (F). PASO 11 Inserte cuatro PASADORES DE MADERA (15F) en el EXTREMO IZQUIERDO (B) y en el PARAL IZQUIERDO (F).
  • Página 65 TORNILLOS. PASO 18 PASO 21 Empuje dos SUJETADORES TWIST-LOCK® SAUDER (36F) en los Empuje cuatro SUJETADORES TWIST-LOCK® SAUDER (36F) en agujeros grandes del VELO DE FONDO PEQUEÑO (M). los agujeros grandes del EXTREMO DERECHO (A) y del Empuje dos EXCÉNTRICOS ESCONDIDOS (1F) en el VELO DE...
  • Página 66 FONDO DERECHO (J). Apriete dos SUJETADORES TWIST-LOCK® TORNILLOS NEGROS DE CABEZA GRANDE de 14 mm (1S). SAUDER y dos EXCÉNTRICOS ESCONDIDOS. Fije el VELO DE FONDO PEQUEÑO (M) al VELO DE FONDO (L). NOTA: Asegúrese de que los PASADORES DE MADERA del Apriete dos EXCÉNTRICOS ESCONDIDOS.
  • Página 67 3. Fije el DORSO DE CAJÓN GRANDE (D78) a los LADOS DE CAJÓN (D87 y D88). Utilice cuatro TORNILLOS NEGROS DE CABEZA PERDIDA de 40 mm (30S). NOTA: Asegúrese de que el FONDO DE CAJÓN (D708) ajuste en la ranura del DORSO DE CAJÓN (D78). www.sauder.com/service 426914 Page 67...
  • Página 68 Repita este paso para insertar el ESTANTE DE TECLADO (Q). Centre una CUBIERTA DE TORNILLO (21P) sobre la cabeza de cada TORNILLO y una CUBIERTA DE EXCÉNTRICO (92P) sobre cada EXCÉNTRICO ESCONDIDO y clave ligeramente adentro con un martillo. Page 68 426914 www.sauder.com/service...
  • Página 69 à Les téléviseurs peuvent être particulièrement un téléviseur. cet effet. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. www.sauder.com/service 426914 Page 69...
  • Página 70 Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 70 426914 www.sauder.com/service...
  • Página 71 à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
  • Página 72 BEFORE MAKING ANY RETURNS TO THE RETAILER. So, how did it go? Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built.