edenox MICRA-2117-D Manual De Instrucciones página 33

16. USB Function:
A. During Ready Mode, insert the U disk which saved the "UTABLE" file.
B. Press "USB" button to update the data of computer board. "LOADING" displays.
C. If the update is successful, the screen will display "SUCCESS". Otherwise, "FAIL" will display.
D. Press "
" or open the door to finish it.
17. Use Option Mode:
This allows the user choose between various ways for the oven to operate.
A. Open the oven door and press "2" pad for 5 seconds. The buzzer sounds once and enter this mode.
B. The screen displays "OP: - -".
C. Press any number button to enter related mode setting.
For example: to set the voice of the buzzer to medium. Press " 2 ", "OP:22" displays.
If you want to change, keep pressing "2", the screen displays "OP:20", "OP:21","OP:22", "OP:23",
"OP:20" .....in cycle.
D. Press "
" to save the current setting. After saved, "OP: - -" display again.
E. During setting process, press "
Ready Mode.
F. If "
" button not pressed at the last step, the program cannot be saved but stay at
previous way.
18. Factory-default setting:
In the Ready Mode,pressing "
A. Press " " and "0", the buzzer sounds once,and the screen will display "CHECK".
If it is in the factory-default setting, the screen will display "11" ,after three seconds, the oven
turn to the ready mode Press "
process of display.
If not in the factory-default setting,the screen will display "00", press "
setting, the screen will display " CLEAR ". the buzzer sounds once, after self-testing, the screen will
display "11" or "00".
B. If do not press "
" when the screen display "00",the setting will cancel.
" to enter Door Open Mode. Close the door will enter
" and " 0 " to factory-default setting.
" to cancel the display ang back to ready back in the
" to the factory-default
14/19
NOTE:
Be careful in the operation as it will restore all
configure to factort-default setting.