All manuals and user guides at all-guides.com
How to unregister a finger or register a new finger
1. If the Drive is mounted to the system, first unmount and
disconnect the Drive.
2. Connect the Drive to your computer.
3. When the Verify User window appears, check the box next to
Register Finger, and then login. After you login the Select Finger
window will appear.
4. Select the finger you want to unregister/register...
If you selected a finger to unregister...
1. You will see a message asking if you are sure you want to
unregister the finger. Click Yes to unregister the finger.
2. When you are done, click Finish.
If you selected a new finger to register...
1. The Register Finger window will appear. Slowly swipe the
selected finger across the Drive's fingerprint scanner, as shown in
the window.
Repeat the swipe until a full, successful scan is registered, as
shown by the progress bar. It may require several swipes.
2. Once the finger has been successfully registered, you can register
another finger if you wish. When you are finished registering
your finger(s) click Finish.
18
EN