Overheating Protection; Cleaning And Maintenance - universalblue UCVT9306-21 Manual De Instrucciones

2. Min. temperature.
3. 0 position or OFF position
4. Fan position.
5. Position I hot air: 1000W
6. Position II hot air, for the maximum hot possible: 2000W
To operate your appliance, please follow below instructions.
1. Plug the heater considering the voltaje (230 V)
2. Set the rotary switch to maximum speed to quickly warm
the. Once the room is at the desire temperature, select a
lower setting to reduce electrical consumption and avoid a
very hot room.
3. Adjust the thermostat to maximum and select the desired
power setting. Once the room is comfortable, rotate the
thermostat counterclockwise, until the heater shuts off. The
thermostat will now maintain the temperature by cycling the
heater on or off. During particularly cold weather, the low
power setting may be insufficient to satisfy the thermostat.
Select a higher setting for these periods.
4. Before switching off the appliance will for 5-10 second in
cool conditions. After that the appliance will be switched off.

4. OVERHEATING PROTECTION

To avoid damage and danger by overheating, this heater is fitted
with protector that switch as off the heater in the event of
overheating until the temperature drops to some extent.
WARNING: In order to avoid overheating, do not cover the
heater.

5. CLEANING AND MAINTENANCE

After use and before cleaning always unplug the appliance and wait
until the item is cool.
21