Remote Control; Overheating Protection; Cleaning And Maintenance - universalblue USBANO2000-18 Manual De Instrucciones

REMOTE CONTROL

OVERHEATING PROTECTION

The heater is protected against overheating, which means it will turn
off automatically if it reaches a high temperature, for example due
to total or partial grids' obstruction . In this case, unplug the
appliance and wait about 30 minutes for it to cool down and remove
the object that is obstructing the grids.

4. CLEANING AND MAINTENANCE

This product does not require a big maintenance work. To clean it,
please follow the following notes:
• Unplug the heater first and wait until it cools completely.
• Use only a soft damp cloth and dry later.
• Do not use abrasive cleaning products.
• Store it in a dry and cool place.
All the functions of this device can be
established through the display or by using the
remote control.
For a longer life, it is recommended to remove
the batteries from the remote control if the
device is not going to be used for a long period
of time.
29