Safety Instructions - Cole-Parmer 50004-10 Manual De Instrucciones

Safety Instructions

1. All operators must be familiar with the mixer and read this entire manual.
If the mixer is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
2. The mixer must be securely fixed to a stable support. Mount to a stand
(50801-50) using a heavy duty clamp (04561-24). If other stands or
clamps are used, the mixer must be secured such that it will not fall if
tipped.
CAUTION: This is not an explosion proof mixer. Do not use in a highly
3.
flammable or explosive environment.
4. Spinning paddles or impellers can cause severe personal injuries.
Operators must use extreme care and good judgment when mixing at
any speed.
5. All mixing paddles and impellers must be in good condition with straight
shafts. If the mixer vibrates at high speeds check the paddle shaft for
damage and repair or replace if needed.
6. Extreme care must be taken when mixing chemicals to ensure that no
chemicals are splashed outside the mixing vessel. Care must be taken
when changing to faster mixing speeds.
7. Ensure that the mixing impeller does not contact the containment vessel.
8. Do not operate while standing in water. Keep the mixer dry and do not
immerse any part, except the mixing paddle into any liquids. Protect
from splashing.
9. Ensure that no loose clothing, jewelry, or hair can become entangled in any
rotating parts. A fast spinning chuck can cause injury to operator.
10. Power can be interrupted to the mixer by pressing the power button. In an
emergency, disconnect the mains cord.
11. Ensure the power button and mains power cord of the mixer can be
accessed immediately, directly and without risk at any time, and above
all, in case of fault.
12. The mixer must be used with supplied power cord. The cord and
grounded plug type are important safety elements. Do not use an
inadequately rated cord or ungrounded plug. Always connect the mixer
to a grounded outlet. Do not alter the plug.
3