Auto Start
This mixer includes an optional Auto Start feature. When set, the mixer will resume
mixing after a power failure, when power has been removed by control equipment
(i.e., PLC) or when the power has been cut (i.e., mixer unplugged). When power
is restored, the mixer will automatically ramp up to the last set speed and resume
mixing. The mixer ships from the factory with Auto Start disabled.
To set the Auto Start feature first ensure the mixer is powered off. Press and
hold the Increase Button then press the Power Button. When active, Auto Start is
indicated by flashing LED dots along the bottom of the display.
To disable Auto Start first ensure mixer is powered off. Press and hold the
Decrease Button then press the Power Button.
Torque Capabilities
Torque Curve
100
90
80
70
60
50
40
30
20
10
0
0
200
400
600
800
1000
1200
RPM
6
1400
1600
1800